[K3] KDVR3 re-transmiting received audio question

I've encountered several instances where being able to play back a
recording of a received SSB station would have been helpful to the other
op in trying to diagnose a problem (RF feedback, distortion, mic gain
level, etc...)

A review of the KDVR3 documentation indicates that when re-transmitting
previously received and recorded audio (not a message), the transmitted
audio will be modified by the current TX Equalizer and Compression
settings. For my intended usage, this would not be desirable since the
transmitted audio wouldn't accurately reflect what was received.

Is there by chance a KDVR3 option that bypasses the TX EQ and Compressor
when re-transmitting *received* audio?

73, Dale
WA8SRA


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Cady, Fred]

Hi Dale,
The TX equalization is saved in a configuration file, so you can save the configuration you have with the TX equalization and then set a flat equalization and save that configuration. It takes a few seconds to restore a configuration but that's one way to change from one to another.
Cheers,
Fred KE7X

Fred Cady
"The Elecraft K3: Design, Configuration and Operation 2nd ed"
"The Elecraft KX3 - Going for the summit"
www.ke7x.com or www.lulu.com
(Working on "The Elecraft K-Line: KPA500 and KAT500")
fcady at ieee dot org

> -----Original Message-----
> From: [hidden email] [mailto:elecraft-
> [hidden email]] On Behalf Of [hidden email]
> Sent: Monday, October 07, 2013 10:55 AM
> To: [hidden email]
> Subject: [Elecraft] [K3] KDVR3 re-transmiting received audio question
>
> I've encountered several instances where being able to play back a
> recording of a received SSB station would have been helpful to the
> other
> op in trying to diagnose a problem (RF feedback, distortion, mic gain
> level, etc...)
>
> A review of the KDVR3 documentation indicates that when re-transmitting
> previously received and recorded audio (not a message), the transmitted
> audio will be modified by the current TX Equalizer and Compression
> settings. For my intended usage, this would not be desirable since the
> transmitted audio wouldn't accurately reflect what was received.
>
> Is there by chance a KDVR3 option that bypasses the TX EQ and
> Compressor
> when re-transmitting *received* audio?
>
> 73, Dale
> WA8SRA
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html