K3 / KPA500 band switching oddity

[Jim Spears]

I recently tripped over an oddity in the way the K3 <-> KPA500
communications handle band switching when commanded from software vs button
pushing.

 

Scenario 1:  

-          KPA500 is set to go to Standby on band change

-          Operator sets KPA500 to Operate

-          Operator makes QSOs or not

-          Operator changes bands from either K3 or KPA500 button push

-          K3 and KPA500 change bands

-          KPA500 goes to Standby

-          K3 gets the word and resumes full output power

-          All is right in this little corner of the world

 

Scenario 2:

-          KPA500 is set to go to Standby on band change

-          Operator sets KPA500 to Operate

-          Operator is making QSOs with WSJT-X, needing amp to work that
"rare one"

-          Operator uses WSJT-X to change bands

-          K3 and KPA500 change bands

-          KPA500 goes to Standby

-          K3 does NOT get the word and operates as if the KPA500 were still
in Operate, putting out low power vs the 100 watts expected

-          K3 and KPA500 are out of synch with respect to Operate vs Standby

 

I do not think I have seen the case when using WSJT-X to command band
changes where the KPA500 is in Operate and the K3 is at full power.  this
would not be good.  

 

So the issue seems to be band changes being commanded by software and not
button pushes.

 

Anyone else seen this?

 

Jim

N1NK

K3 s/n 6xxx

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bob McGraw - K4TAX]

I change bands from the computer running WSJT-X.   The K3S follows, the
KPA500 follows and the KAT500 follows.  All seems good to me.  I do have
the KPA500 go to STBY on band change.  This is a user menu item.

I don't push buttons on the KPA500 to change bands.

73

Bob, K4TAX


On 10/27/2019 2:48 PM, Jim Spears wrote:

> I recently tripped over an oddity in the way the K3 <-> KPA500
> communications handle band switching when commanded from software vs button
> pushing.
>
>  
>
> Scenario 1:
>
> -          KPA500 is set to go to Standby on band change
>
> -          Operator sets KPA500 to Operate
>
> -          Operator makes QSOs or not
>
> -          Operator changes bands from either K3 or KPA500 button push
>
> -          K3 and KPA500 change bands
>
> -          KPA500 goes to Standby
>
> -          K3 gets the word and resumes full output power
>
> -          All is right in this little corner of the world
>
>  
>
> Scenario 2:
>
> -          KPA500 is set to go to Standby on band change
>
> -          Operator sets KPA500 to Operate
>
> -          Operator is making QSOs with WSJT-X, needing amp to work that
> "rare one"
>
> -          Operator uses WSJT-X to change bands
>
> -          K3 and KPA500 change bands
>
> -          KPA500 goes to Standby
>
> -          K3 does NOT get the word and operates as if the KPA500 were still
> in Operate, putting out low power vs the 100 watts expected
>
> -          K3 and KPA500 are out of synch with respect to Operate vs Standby
>
>  
>
> I do not think I have seen the case when using WSJT-X to command band
> changes where the KPA500 is in Operate and the K3 is at full power.  this
> would not be good.
>
>  
>
> So the issue seems to be band changes being commanded by software and not
> button pushes.
>
>  
>
> Anyone else seen this?
>
>  
>
> Jim
>
> N1NK
>
> K3 s/n 6xxx
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]