For those of you who are having the problem Jim reports. I found a
formatting error in LP-Bridge in split mode which was dropping a "zero"
in the reported frequency to SteppIR in this mode. It is fixed in
version 0.9.8.2, which can be downloaded on the LP-Bridge page at
http://www.telepostinc.com/LPB.html73,
Larry N8LP
> Message: 23
> Date: Fri, 26 Sep 2008 02:24:38 -0000
> From: "James Denneny" <
[hidden email]>
> Subject: [Elecraft] K3/KRX3 80M SPLIT
> To: <
[hidden email]>
> Message-ID: <000a01c91f7f$08542650$18fc72f0$@net>
> Content-Type: text/plain; charset="us-ascii"
>
> There may be a bug here. The key seems to be simplex or split. If I put
> both vfos on the same 80M freq and leave K3 in simplex, SteppIR tuning is
> perfect. If I select "SPLIT" and key K3, the SteppIR controller heads to
> 35Mhz even though both vfo's are on same freq.
>
>
>
> Fortunately, I have a band-aid. I use LP-Bridge output to communicate with
> controller. I simply turn LP-Bridge output off when operating split on 80
> and then I don't care what the K3 is trying to tell the controller.
>
>
>
> I am running latest K3 firmware. I have not investigated this phenomenon on
> other bands as I only use the BiggIR on 80M
>
>
>
> Jim Denneny
>
> K7EG
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
