[K3] KRX3 and KBF3 install question

[John Shadle]

Hi all,
I'm working on my KRX3 install and am wondering if I should move my
KBF3 (currently installed on my main RX) to my subreceiver, or leave
it in my main receiver.

Are there advantages/disadvantages to either situation, as far as
sensitivity of RX for ham bands and bands outside the ham bands?

Thanks!
-john W4PAH
Madison, WI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dick Dievendorff]

I left mine in the main because I find it easier to casually use than the sub.

Dick, K6KR


On Sep 4, 2012, at 9:04 PM, John Shadle <[hidden email]> wrote:

> Hi all,
> I'm working on my KRX3 install and am wondering if I should move my
> KBF3 (currently installed on my main RX) to my subreceiver, or leave
> it in my main receiver.
>
> Are there advantages/disadvantages to either situation, as far as
> sensitivity of RX for ham bands and bands outside the ham bands?
>
> Thanks!
> -john W4PAH
> Madison, WI
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Guy, K2AV]

Ditto.

On Wed, Sep 5, 2012 at 12:11 AM, Dick Dievendorff <[hidden email]>wrote:

> I left mine in the main because I find it easier to casually use than the
> sub.
>
> Dick, K6KR
>
>
> On Sep 4, 2012, at 9:04 PM, John Shadle <[hidden email]> wrote:
>
> > Hi all,
> > I'm working on my KRX3 install and am wondering if I should move my
> > KBF3 (currently installed on my main RX) to my subreceiver, or leave
> > it in my main receiver.
> >
> > Are there advantages/disadvantages to either situation, as far as
> > sensitivity of RX for ham bands and bands outside the ham bands?
> >
> > Thanks!
> > -john W4PAH
> > Madison, WI
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:[hidden email]
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html