K3 - KRX3 question

[Bruce Meier-2]

I have been chasing Midway Isl (K4M) and using my sub-RX to follow the pack.
When K4M was not real loud I would turn the Sub off to get the audio in both
ears then back on.  After doing that several times (perhaps 10 - 15) the
Sub-RX turns on (according to the front panel icon) but there is no audio.
The only way I can get the audio back is to turn the K3 off and on.   Then
it is fine for another 'unknown' number of Sub off/on transitions.

This has occurred with several versions of the u-code.   I am running the
3.44.

Has anyone else experienced this?

73,
Bruce-N1LN

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dick Grolleman]

I do have the smae thing haping Bruce
running version 3.27
also happend with older version, although more often wtih the older versions

73 de Dick PA3FQA

----- Original Message -----
From: "Bruce Meier" <[hidden email]>
To: <[hidden email]>
Sent: Sunday, October 18, 2009 11:24 AM
Subject: [Elecraft] K3 - KRX3 question

>I have been chasing Midway Isl (K4M) and using my sub-RX to follow the
>pack.
> When K4M was not real loud I would turn the Sub off to get the audio in
> both
> ears then back on.  After doing that several times (perhaps 10 - 15) the
> Sub-RX turns on (according to the front panel icon) but there is no audio.
> The only way I can get the audio back is to turn the K3 off and on.   Then
> it is fine for another 'unknown' number of Sub off/on transitions.
>
> This has occurred with several versions of the u-code.   I am running the
> 3.44.
>
> Has anyone else experienced this?
>
> 73,
> Bruce-N1LN
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[gm3sek]

Bruce Meier wrote:

>I have been chasing Midway Isl (K4M) and using my sub-RX to follow the
>pack. When K4M was not real loud I would turn the Sub off to get the
>audio in both ears then back on.  After doing that several times
>(perhaps 10 - 15) the Sub-RX turns on (according to the front panel
>icon) but there is no audio. The only way I can get the audio back is
>to turn the K3 off and on.   Then it is fine for another 'unknown'
>number of Sub off/on transitions.
>
>This has occurred with several versions of the u-code.   I am running
>the 3.44.
>
>Has anyone else experienced this?
>

Yes - same problem, same firmware, same station.


--

73 from Ian GM3SEK

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[DC1RS]

Just tried it for about at least 50 times in a row, always get  the sub-receiver audio without a problem. I'm also using. 3.44.

73 de Roland, DC1RS

[Stewart Baker]

Same hear.

73
Stewart G3RXQ
On Sun, 18 Oct 2009 05:14:56 -0700 (PDT), DC1RS wrote:
>
> Just tried it for about at least 50 times in a row, always get
 the
> sub-receiver audio without a problem. I'm also using. 3.44.
>
> 73 de Roland, DC1RS
>
>
> -----
> K3/100 #1243, KFL3A-2.8K, KFL3A-2.1K, KFL3A-400, KRX3,
KFL3A-2.8K, KFL3A-400,
> KAT3


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Mike K2MK]

Hi Bruce:

I have been using the same procedure as you on CW with the last bunch of
DXpeditions and I haven't had the exact problem you described. But I have
noticed that sometimes it takes a second for the SUB to come alive. I get a
squeaky sound in the right ear as if the SUB is squeezing out the signals.

73,
Mike K2MK


Bruce Meier
Sun, 18 Oct 2009 02:24:02 -0700

I have been chasing Midway Isl (K4M) and using my sub-RX to follow the pack.
When K4M was not real loud I would turn the Sub off to get the audio in both
ears then back on.  After doing that several times (perhaps 10 - 15) the
Sub-RX turns on (according to the front panel icon) but there is no audio.
The only way I can get the audio back is to turn the K3 off and on.   Then
it is fine for another 'unknown' number of Sub off/on transitions.

This has occurred with several versions of the u-code.   I am running the
3.44.

Has anyone else experienced this?

73,
Bruce-N1LN
 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html