Installed the KSYN3A synthesizer today, it was pretty easy.
Used earlier post idea of installing on op desk without disconnecting all the rear cables, used good static protection.
Only slight problem was the long leads on the mini connector (page 11). I trimmed them but when installed they were touching. I used very small cutters and trimmed them several times before I got them short enough not to touch.
Other than that, all went well, rig works great. Will do some testing to see the difference. 73
Good luck
Emory WM3M
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
