K3/KX3 Programmer's Reference revision D6 now available

[wayne burdick]

The KX3 and K3 have very similar remote-control command sets. Both are  
covered by the "K3/KX3 Programmer's Reference," available here:

    http://www.elecraft.com/manual/K3&KX3%20Pgmrs%20Ref%20D6.pdf

In general the KX3 executes the entire K3 command set. Exceptions are  
noted in the document. The KX3 also has a few new commands of its own.

73,
Wayne
N6KR



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dave Anderson, K4SV]

Hi Wayne,


So to extrapolate a bit, would there be a KX3/0 in the works to control a K3?
 
Dave Anderson, K4SV
Tryon, NC
 828 777-5088
 
www.K4SV.com
 

>________________________________
> From: Wayne Burdick <[hidden email]>
>To: [hidden email]
>Cc: Elecraft Reflector <[hidden email]>
>Sent: Wednesday, March 21, 2012 3:19 PM
>Subject: [Elecraft] K3/KX3 Programmer's Reference revision D6 now available
>
>The KX3 and K3 have very similar remote-control command sets. Both are 
>covered by the "K3/KX3 Programmer's Reference," available here:
>
>    http://www.elecraft.com/manual/K3&KX3%20Pgmrs%20Ref%20D6.pdf
>
>In general the KX3 executes the entire K3 command set. Exceptions are 
>noted in the document. The KX3 also has a few new commands of its own.
>
>73,
>Wayne
>N6KR
>
>
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[wayne burdick]

No.

Wayne

On Mar 22, 2012, at 11:37 AM, Dave Anderson, K4SV wrote:

> Hi Wayne,
>
>
> So to extrapolate a bit, would there be a KX3/0 in the works to  
> control a K3?
>
> Dave Anderson, K4SV
> Tryon, NC
>
> 828 777-5088
>
> www.K4SV.com
>
>
> From: Wayne Burdick <[hidden email]>
> To: [hidden email]
> Cc: Elecraft Reflector <[hidden email]>
> Sent: Wednesday, March 21, 2012 3:19 PM
> Subject: [Elecraft] K3/KX3 Programmer's Reference revision D6 now  
> available
>
> The KX3 and K3 have very similar remote-control command sets. Both are
> covered by the "K3/KX3 Programmer's Reference," available here:
>
>     http://www.elecraft.com/manual/K3&KX3%20Pgmrs%20Ref%20D6.pdf
>
> In general the KX3 executes the entire K3 command set. Exceptions are
> noted in the document. The KX3 also has a few new commands of its own.
>
> 73,
> Wayne
> N6KR
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html