K3/KX3 and win4k suite..using multiple virtual com port generators

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

K3/KX3 and win4k suite..using multiple virtual com port generators

wgravett@juno.com
I have both units connected to win4k3.. the k3 on com 3 , the kx3 on com 4. I am using com0com as my virtual port generator on com3 per Tom's advice.

The problem arises with the 3rd party software (LOGGER32) when I switch rigs. com0com is working for the k3 on com 3 , but when I switch to the kx3, I
have no virtual com ports for com 4 and LOGGER32 wont work ie no dynamic kx3 freq readouts on the new contact log page.

Any suggestions ? is there a virtual com port generator out there that will handle multiple com ports at the same time  ?? Can I just unplug the k3 on com 3 or is that really
going to mess things up ?

Thanks for your help.
73,

Bill, W5PGZ
____________________________________________________________
Heavy rains mean flooding
Anywhere it rains it can flood. Learn your risk. Get flood insurance.
http://thirdpartyoffers.juno.com/TGL3141/55d8a31dd61d231c0a02st02duc
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: K3/KX3 and win4k suite..using multiple virtual com port generators

tomb18
Hi
I have replied off list.
Thanks

Sent from BlueMail



On Aug 24, 2015, 11:07 AM, at 11:07 AM, "[hidden email]" <[hidden email]> wrote:

>I have both units connected to win4k3.. the k3 on com 3 , the kx3 on
>com 4. I am using com0com as my virtual port generator on com3 per
>Tom's advice.
>
>The problem arises with the 3rd party software (LOGGER32) when I switch
>rigs. com0com is working for the k3 on com 3 , but when I switch to the
>kx3, I
>have no virtual com ports for com 4 and LOGGER32 wont work ie no
>dynamic kx3 freq readouts on the new contact log page.
>
>Any suggestions ? is there a virtual com port generator out there that
>will handle multiple com ports at the same time  ?? Can I just unplug
>the k3 on com 3 or is that really
>going to mess things up ?
>
>Thanks for your help.
>73,
>
>Bill, W5PGZ
>____________________________________________________________
>Heavy rains mean flooding
>Anywhere it rains it can flood. Learn your risk. Get flood insurance.
>http://thirdpartyoffers.juno.com/TGL3141/55d8a31dd61d231c0a02st02duc
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]