K3 Key Out

[Don Rasmussen]

The main benefit would be to other transceivers you
may have, like my OMNI VI+, now I don't need to think
which of my rigs are okay for the amp. It's great to
know the K3 device is diode protected - K3 - what
else? !!!


>>>The Elecraft K3 uses an IRF1630 HEXFET Power
MOSFET, rated for 200V with an ON Resistance of .4 Ohm
in a TO-220 Package. Don't see much of a gain by using
the external device.....




[Elecraft] K3 Key Out
Dave Zeph zephd at indy.rr.com
Mon Sep 1 18:49:09 EDT 2008

Previous message: [Elecraft] K3 Key Out
Next message: [Elecraft] [K3] 3rd order distortion
Messages sorted by: [ date ] [ thread ] [ subject ] [
author ]

--------------------------------------------------------------------------------

The Keying Transistor used in the Harbach Soft Key
uses an IRF610 HEXFET
Power MOSFET, rated for 200V with an ON Resistance of
1.5 Ohm in a TO-220
Package.

The Elecraft K3 uses an IRF1630 HEXFET Power MOSFET,
rated for 200V with an
ON Resistance of .4 Ohm in a TO-220 Package.

Don't see much of a gain by using the external device
.....



73 ---> Dave, W9ZRX




> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-
> bounces at mailman.qth.net] On Behalf Of Don
Rasmussen
> Sent: Monday, 01 September, 2008 18:20
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] K3 Key Out
>
> I soldered up the soft key mod today, it's
inexpensive
> and simple to install.


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com