K3 Key jack

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

K3 Key jack

Craig - AE6RR
I am using my K3/100 with the RemoteRig setup.  The RemoteRig Radio RRC has
a 1/8" or 3.5mm stereo connector for CW key out (straight key).  The cable
set came with a stereo 1/8" to 1/8" cable and a stereo 1/8" to 1/4" adaptor.
The 1/8" plug is a very loose fit in the adaptor and I am having
intermittent connection problems.

I am going to look for a better adaptor or make a 1/8" to 1/4" cable.

The question is, what kind of connector does the K3 have for key input (not
paddle)?  Is it a 3-conductor connector (stereo) or a 2-conductor (mono)
connector?

Happy New Year & 73,

Craig, AE6RR

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3 Key jack

Doug Joyce
Hi Craig:  The Key jack (J13) is 3 conductor but only the Tip and shell is
used - there is no connection to the Ring.  (It is shown on page 3 of the
Schematics - do a search for J13.)

73,   Doug   VE3MV

----- Original Message -----
From: "Craig - AE6RR" <[hidden email]>
To: <[hidden email]>
Sent: Wednesday, December 26, 2012 1:27 PM
Subject: [Elecraft] K3 Key jack


>I am using my K3/100 with the RemoteRig setup.  The RemoteRig Radio RRC has
> a 1/8" or 3.5mm stereo connector for CW key out (straight key).  The cable
> set came with a stereo 1/8" to 1/8" cable and a stereo 1/8" to 1/4"
> adaptor.
> The 1/8" plug is a very loose fit in the adaptor and I am having
> intermittent connection problems.
>
> I am going to look for a better adaptor or make a 1/8" to 1/4" cable.
>
> The question is, what kind of connector does the K3 have for key input
> (not
> paddle)?  Is it a 3-conductor connector (stereo) or a 2-conductor (mono)
> connector?
>
> Happy New Year & 73,
>
> Craig, AE6RR
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html