Ah, the other Gary :),
I have... read the entire manual, several times. Any time I spend $4K
on something, especially something I assemble; I read the manual.
I did, I think do the LCD ADJ and that increased the contrast but it
didn't as I recall change the diffraction. I will though go and check
that out again, I have... mis-read before.
Thanks for the suggestion.
The other Gary,
:)
KA1J
> Gary,
>
>
>
> There is but unfortunately you will need to read the Operator's manual
> and follow the instructions for adjusting the "LCD ADJ" Main menu entry in
> order to accomplish this.
>
>
>
> (I know I could tell you more, but I fear I would only be enabling your
> aversion to reading the manual.)
>
>
>
> 73,
> Gary KI4GGX
>
>
>
> P.S. See the related portion of the manual immediately below .
>
>
>
>
>
>
>
> _____
>
>
>
> Gary Smith
> Sat Mar 14 09:49:36 EDT 2009
>
>
>
> Hi,
>
> I find the brightness and contrast are much better when looking down
> at the radio than straight on when it's elevated on the bail.
> Increasing the brightness helps somewhat but when looking down at it
> (flat on the table, sans bail) it's much too bright.
>
> Is there some way to adjust the refraction from the LCD to match the
> viewing angle?
>
> Thanks
>
> Gary
> KA1J
>
>
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
