K3 LIN OUT Behavior

[wb6rse1]

Stereo cable connected to LIN OUT which is set to NOR. SUB RX off.  
Audio is only in the Main/Left channel. Turn SUB on and then audio is  
present on the right channel.

Set LIN OUT to =PHONES and audio is present at LIN OUT on both  
channels and the right channel switches when the SUB RX is toggled. In  
this case, the FP AF control must be used to adjust gain.

Question: I have not found the answer in the manual - yet. Is there a  
way to have LIN OUT set to NORM and have audio in both channels even  
if the SUB RX is off but have the SUB RX audio in the right channel as  
with the =PHONES setting?

TU - Steve WB6RSE
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[KK7P]

> Stereo cable connected to LIN OUT which is set to NOR. SUB RX off.  
> Audio is only in the Main/Left channel. Turn SUB on and then audio is  
> present on the right channel.
>  
Correct.
> Set LIN OUT to =PHONES and audio is present at LIN OUT on both  
> channels and the right channel switches when the SUB RX is toggled. In  
> this case, the FP AF control must be used to adjust gain.
>  
Yes, it echoes what you would hear using the headphone jack.
> Question: I have not found the answer in the manual - yet. Is there a  
> way to have LIN OUT set to NORM and have audio in both channels even  
> if the SUB RX is off but have the SUB RX audio in the right channel as  
> with the =PHONES setting?
>  
Not with the present UI.

73,

Lyle KK7P

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[wb6rse1]

On Sep 4, 2009, at 1:22 PM, Lyle Johnson wrote:

Not with the present UI.
______

Thanks Lyle - I just found a work around:

LIN OUT = NOR, SUB RX ON  -AND- LOCKED to the MAIN = same audio and  
fixed level in both channels.

Have to remember to unlock VFOs when operating digi modes split.

TU - Steve WB6RSE
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html