K3 Line-In for PSK31 not working

[William Shappley-2]

Alan -

I have used PSK31, MFSK16 and RTTY using Hamscope with no problems.  
However,
the rear panel LINE IN (mono) and LINE OUT (stereo) jacks are 3.5mm,  
NOT the
old trusty 1/8 inch (they are slightly larger).  I initially used  
some 1/8" plugs I had, and they worked, but were
loose and prone to poor connection.  I ordered 3.5mm plugs from  
Mouser and they fit FB.

- Bill
K4DXU




Lyle replied to Alan:

Message: 13
Date: Mon, 14 Jan 2008 15:16:17 -0800
From: Lyle Johnson <[hidden email]>
Subject: Re: [Elecraft] K3 Line-In for PSK31 not working
To: [hidden email]
Message-ID: <[hidden email]>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed


>> I was going to use VOX instead of a physical PTT, but that doesn't  
>> work
>> well. I've adjusted gains but it insists on cycling on & off. Thought
>> anti-VOX would fix, but it doesn't.
>>

Please check your cable and verify it is firmly seated into the K3 LINE
IN connector.  I routinely use LINE IN with VOX in DATA A mode to
operate PSK31 on my K3 with no problems.

73,

Lyle KK7P

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com