Elecraft

K3 Lineout level

Classic

List

2 messages Options

Hi all,

Is there any way of measuring the line output level as I seem to have none that I can see?

The reason I ask is I cannot seem to see any signals in the MixW waterfall anymore after upgarding to the 2nd RX and the DVR

Full setup is 13.kzh filter in #1 and 2.7 in #2 with just the 2.7 in the second rx

Yes i have the latest Elecraft Utility prog and F/W.

I have obviously missed something in the config menu and any help appreciated

BTW the rig was working FB before the upgrade to the second rx etc.

I do have th K3AFMDKT kit at hand so wiil do that if I really have to

Any help via the list [digest] or direct (peterd<at>igrin<dot>co<dot>nz) tnx vry much

Peter ZL1PWD

K3#139

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Re: K3 Lineout level

Hi all,

Here is an update to my line out problem in which there is no detectable line out signal.

I have tested for a signal using headphones connected to the lineout socket and have no output.(Thanks Rich VE3KI)

The K3AFMDKT upgade has been made with no improvement or difference in signal.

To sumamrise:

K3 with 13 khz filter at #1 pos and 2.7 at #2

KRX3 with 2.7 khz filter at # 1 pos

KDVR also installed

I can confirm that the lineout level was FB before the latest hardware upgrades.

Any and all help very much appreciated.

Peter ZL1PWD

K3#139