*I have experienced this problem four times now and I see from the archives
that others have experienced it too. For no apparent reason there is a
total loss of receive audio in the SSB mode.
If the width is opened to above 3 kHz, receive audio returns to normal;
decrease the width below 3 kHz and the audio mutes again.
I have reset the filter offset, no help. Although no changes have been made
in filters, have double checked all settings both in the radio and via the
K3 utility. If, in the CONFIG menu, with FL1 ON showing in the LSB mode, I
cycle the mode switch to FL1 ON in CW, then back to FL1 ON LSB, the receive
audio comes back on. But, after exiting the CONFIG menu, the audio mutes
again.
The only thing that restores the radio to normal operation is to do a
Restore Configuration from the K3 utility. One time did a total radio reset
combined with a Restore Configuration. This problem has just cropped up
within the last month or so. K3 is #1737, running version 4.25. Filters:
2.7; 400.
This problem seems rare -- have seen only two other postings on it.
Any ideas? Thanks, Lee (K9CM)*
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
