[K3] Macro for TEXT DECODE

[N7US]

Now that I have an SVGA for my P3, I'm playing with TEXT DECODE, since it
can display several rows of decoded text.

I'd appreciate help with a macro to quickly turn TEXT DECODE on and off.

I understand that SWH40 will press and hold the CWT/0 button to get into
TEXT DECODE and that SWT40 will exit TEXT DECODE setup.  Apparently UPB or
DNB can't be used to increase or decrease ("rotate") VFO B to turn decode on
or off.

Is there a different command to turn text decode on or off?

For those unaware of it, using a connected keyboard, the SVGA has the
capability of storing 50 macros as well as 50 text messages.  It can also
send text in CW, RTTY, or PSK31.  I don't understand why, but the
transmitted RTTY sounds peculiar on the monitor.

73, Jim N7US





______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dick Dievendorff-4]

I haven't found a command to manipulate text decode. This is why the K3 Utility terminal page requires you to set up the digital mode or CW.

Dick, K6KR

> On Nov 29, 2013, at 4:53, "Jim N7US" <[hidden email]> wrote

> I'd appreciate help with a macro to quickly turn TEXT DECODE on and off.
>
> I understand that SWH40 will press and hold the CWT/0 button to get into
> TEXT DECODE and that SWT40 will exit TEXT DECODE setup.  Apparently UPB or
> DNB can't be used to increase or decrease ("rotate") VFO B to turn decode on
> or off.
>
> Is there a different command to turn text decode on or off?
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html