The following macro runs OK from the K3 Utility program,
but not when assigned to a function key - why ? TUNEON MN019;MP001;MN255;SWH16; 73 Stewart G3RXQ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Hi Stewart,
Your macro works here. You probably missed one step. First I entered you macro in the K3 Utility on the Macro tab. I pressed the Edit Macros button and typed it into the field for Macro 8. Next I hit the button labeled "Write Macros 1-8 to K3". Then I hit Save and quit the Utility program. After that I went to the K3 and brought up CONFIG:MACRO and hit the 8 button. The lower display then showed "MACRO 8". I tapped the M4 button on my K3 in order to save the macro to that button. The lower display then briefly displayed M4T SET. That's it. My K3 goes into tune (and I suppose does the other things in your macro) when I tap my M4 button. 73, Mike K2MK
|
Hi Mike,
I now have my macro working, but I don't know why. The only difference is that instead of assigning to M1H SET, I followed your example and assigned it to M1T SET. It would appear that there is some conflict between a function key Hold and a function that uses Hold. Assigning to Tap makes it work. Very strange... Thanks for your help. 73 Stewart G3RXQ On Mon, 2 Jul 2012 07:42:03 -0700 (PDT), Mike K2MK wrote: > Hi Stewart, > > Your macro works here. You probably missed one step. First I entered you > macro in the K3 Utility on the Macro tab. I pressed the Edit Macros button > and typed it into the field for Macro 8. Next I hit the button labeled > "Write Macros 1-8 to K3". Then I hit Save and quit the Utility program. > > After that I went to the K3 and brought up CONFIG:MACRO and hit the 8 > button. The lower display then showed "MACRO 8". I tapped the M4 button on > my K3 in order to save the macro to that button. The lower display then > briefly displayed M4T SET. That's it. My K3 goes into tune (and I suppose > does the other things in your macro) when I tap my M4 button. > > 73, > Mike K2MK > > > Stewart@twinwood wrote >> >> The following macro runs OK from the K3 Utility program, >> but not when assigned to a function key - why ? >> >> TUNEON MN019;MP001;MN255;SWH16; >> >> 73 >> Stewart G3RXQ > > > -- > View this message in context: http://elecraft.365791.n2.nabble.com/K3-Macro-query-tp7558469p7558474.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
I need some help understanding SWH/SWT commands and assignments to PF[1|2]|M[1-4]keys:
I'm trying to assign a MACRO5 to PF1; but it fails to perform the SWT19 function... Please see tests below... Reference K3...KX2 Programmers Reference Guide G1; page 25 TAP HOLD nn XMIT TUNE 16 ATU Tune ATU 19 Here are the macros: MACRO1: SWH16; MACRO2: SWT16; MACRO3: SWH19; MACRO4: SWT19; MACRO5: IS*1500;BW0280;AN1;MN023;MP002;MN255;PC100;SWT19; When I execute from the K3 Utility Rev 1.16.7.25: Macro Executed K3 Response MACRO1: Manual Tune On/Off MACRO2: Enable Transmit On/Off MACRO3: Turned ATU On/Off MACRO4: Performed Auto Tune Function MACRO5: All values/functions complete successfully Assign to M[1-4] as TAP (All works as expected) Macro Executed K3 Response MACRO1: Manual Tune On/Off MACRO2: Enable Transmit On/Off MACRO3: Turned ATU On/Off MACRO4: Performed Auto Tune Function MACRO5: All values/functions complete successfully Assign to M[1-4] as HOLD (ERROR w/MACRO5) Macro Executed K3 Response MACRO1: Manual Tune On/Off MACRO2: Enable Transmit On/Off MACRO3: Turned ATU On/Off MACRO4: Performed Auto Tune Function MACRO5: All values/functions complete successfully EXCEPT SWT19 Assign to PF[1-2] as HOLD (ERROR w/MACRO5) Macro Executed K3 Response MACRO1: Manual Tune On/Off MACRO2: Enable Transmit On/Off MACRO3: Turned ATU On/Off MACRO4: Performed Auto Tune Function MACRO5: All values/functions complete successfully EXCEPT SWT19
K8OI
mailto:jlbates4@gmail.com (804) 592-1068 |
Jim
I do not see the macros in your post, but you first have to assign the macros to the buttons, and then activate then by using the SWT/SWH commands listed in the K3 Programmers Reference. It is a two step process. 73, Don W3FPR On 6/2/2017 3:16 PM, jlbates4 wrote: > I need some help understanding SWH/SWT commands and assignments to > PF[1|2]|M[1-4]keys: > > I'm trying to assign a MACRO5 to PF1; but it fails to perform the SWT19 > function... Please see tests below... > > > > > > ----- > K8OI > mailto:[hidden email] > (804) 592-1068 > -- > View this message in context: http://elecraft.365791.n2.nabble.com/K3-Macro-query-tp7558469p7631362.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
In reply to this post by Stewart@twinwood
Don et al,
I'm not sure why the entire post didn't come through - (please reference link: http://elecraft.365791.n2.nabble.com/K3-Macro-query-td7558469.html#a7631362) Here's the original post: I need some help understanding SWH/SWT commands and assignments to PF[1|2]|M[1-4]keys: I'm trying to assign a MACRO5 to PF1; but it fails to perform the SWT19 function... Please see tests below... Reference K3...KX2 Programmers Reference Guide G1; page 25 TAP HOLD nn XMIT TUNE 16 ATU Tune ATU 19 Here are the macros: MACRO1: SWH16; MACRO2: SWT16; MACRO3: SWH19; MACRO4: SWT19; MACRO5: IS*1500;BW0280;AN1;MN023;MP002;MN255;PC100;SWT19; When I execute from the K3 Utility Rev 1.16.7.25: Macro Executed K3 Response MACRO1: Manual Tune On/Off MACRO2: Enable Transmit On/Off MACRO3: Turned ATU On/Off MACRO4: Performed Auto Tune Function MACRO5: All values/functions complete successfully Assign to M[1-4] as TAP (All works as expected) Macro Executed K3 Response MACRO1: Manual Tune On/Off MACRO2: Enable Transmit On/Off MACRO3: Turned ATU On/Off MACRO4: Performed Auto Tune Function MACRO5: All values/functions complete successfully Assign to M[1-4] as HOLD (ERROR w/MACRO5) Macro Executed K3 Response MACRO1: Manual Tune On/Off MACRO2: Enable Transmit On/Off MACRO3: Turned ATU On/Off MACRO4: Performed Auto Tune Function MACRO5: All values/functions complete successfully EXCEPT SWT19 Assign to PF[1-2] as HOLD (ERROR w/MACRO5) Macro Executed K3 Response MACRO1: Manual Tune On/Off MACRO2: Enable Transmit On/Off MACRO3: Turned ATU On/Off MACRO4: Performed Auto Tune Function MACRO5: All values/functions complete successfully EXCEPT SWT19 --- Jim Bates (804) 690-9143 On Fri, Jun 2, 2017 at 8:16 PM, Don Wilhelm <[hidden email]> wrote: > Jim > > I do not see the macros in your post, but you first have to assign the > macros to the buttons, and then activate then by using the SWT/SWH commands > listed in the K3 Programmers Reference. It is a two step process. > > 73, > Don W3FPR > > On 6/2/2017 3:16 PM, jlbates4 wrote: > >> I need some help understanding SWH/SWT commands and assignments to >> PF[1|2]|M[1-4]keys: >> >> I'm trying to assign a MACRO5 to PF1; but it fails to perform the SWT19 >> function... Please see tests below... >> >> >> >> >> >> ----- >> K8OI >> mailto:[hidden email] >> (804) 592-1068 >> -- >> View this message in context: http://elecraft.365791.n2.nabb >> le.com/K3-Macro-query-tp7558469p7631362.html >> Sent from the Elecraft mailing list archive at Nabble.com. >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [hidden email] >> >> Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Free forum by Nabble | Edit this page |