[K3] Macro with UP/DN parameter changes?

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

[K3] Macro with UP/DN parameter changes?

w9rit
Hello,
 
I am trying to create a K3 remote control command string (or macro) to turn on/off the text decode. The K3 release notes and the programmers manual show this is possible, but I can not get it to work.
 
Back in 2008, the release notes for (MCU 1.68) highlight that the "UP" and "DN" remote control commands now work for parameter setup, such as NB, TEXT DEC, DATA MD, NR ADJ, etc. Adding 'B' (e.g., "UPB;", "DNB;") controls the VFO B parameter; otherwise, the VFO A parameter is controlled.
 
With my "Text Dec" set at "CW30-90". I have tried this command string SWH40;DNB;DNB;DNB;SWT40; to hold the TEXT DEC, turn vfo b three selections, and tap TEXT DEC. The SWH and SWT commands work but the vfo commands do not.
 
Maybe, I am missing something? Can anyone else confirm that these "VFO UP/DN Parameter controls" work in K3 Release 4.48 or higher?
 
Thanks for your help,
 
73 - Dave W9RIT
K3 #3177