It's more complicated than that. The M1-4 buttons have no separate
"hold" function when they are used as CW (and I assume DVR) memories -
more precisely, HOLDing one of them puts it in auto-repeat, at least in
CW/DATA (I don't know about the DVR - voice modes are a mystery to me).
However, when they are used to store macros, TAP and HOLD are
independent (i.e. you can store two different macros in one key). I seem
to recall that if you only store one of the two in a given key (tap and
hold), tapping and holding both execute the same macro.
What this means is that you can use any one of these keys to store
either a single memory message or two macros, but you cannot use a key
to store both a memory message (tap) and a macro (hold). You can mix and
match between keys, e.g. M1 contains two macros (tap & hold), M2
contains a CW message, M3 contains two more macros, etc.
73,
Rich VE3KI
HB9ANM wrote:
> The M1-4 buttons have no "Hold" function.
> But the REC button has one: hold it to get into BANK 1, again for BANK 2.
> Then tap it to return to the normal M1-M4...
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
