Larry,
Menu support for the UP and DN commands was unintentionally removed a long time ago. It was added back in as of rev. 5.33.
I tested your macros, and they work with the latest release (5.38), except that you need two "UP;" commands to go from FP mic to LINE IN.
73,
Wayne
N6KR
On Dec 16, 2015, at 5:55 PM, Larry Boekeloo <
[hidden email]> wrote:
> Hi everyone,
> I have two Macros set up to change the audio input on my K3 from the front panel to the Line In on the rear panel.
> They worked fine until one of the latest big releases:
> Macro 1: MNO53;DN;DN;DN;MN255:
> Macro 2: MNO53;DN;DN;DN;UP;MN255:
> Macro 1 sets the K3 to the mic connector on the front and Macro 2 sets the input to Line In on the rear panel.
> When I execute them, they come up to the display and I have to rotate the dial to select the input. Previously, they just worked.
> Any ideas?
> Thanks.
> Larry, KN8N
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
