K3 Memory Issue

[KE4INM]

Thanks Dick, K6KR.
That was the issue.
Changed the CONFIG:MEM to "nor" and everything started working great. Thanks
again. It always seams to be something simple we overlook as the problem.
Jim
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Guy, K2AV]

Is the memory utility not going to track this option?  Does view quick
memories only refer to m1-m4?

73, Guy.

On Thu, Aug 5, 2010 at 9:37 PM, Jim Woodson <[hidden email]> wrote:

> Thanks Dick, K6KR.
> That was the issue.
> Changed the CONFIG:MEM to "nor" and everything started working great. Thanks
> again. It always seams to be something simple we overlook as the problem.
> Jim
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dick Dievendorff]

Memories 0-9 are one kind of quick memory and memories M1-M4 are another
kind of quick memory.

In the K3 Owner's Manual, revision D-7, "quick" memories 00-09 are described
on page 16 and also the per-band quick memories M1-M4 are described.

All of these are supported by the K3 Frequency Memory Editor.

However, when you have chosen K3 menu option CONFIG:MEM 0-9 is set to "BAND
SEL", then they act as band switches, and QSY to the last-used frequency on
the band in the memory, rather than the actual frequency in the memory.

View "Quick Memories" does select whether or not the per-band quick memories
are shown or not.  These memories can store only frequencies on that
specific band. For example, 160 M4 cannot store a frequency on the 30 meter
band.

Memories 00-99 are always shown, without regard to the setting of the
CONFIG:MEM 00-9 setting.


Dick, K6KR
.

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Guy Olinger K2AV
Sent: Thursday, August 05, 2010 8:02 PM
To: Jim Woodson
Cc: [hidden email]
Subject: Re: [Elecraft] K3 Memory Issue

Is the memory utility not going to track this option?  Does view quick
memories only refer to m1-m4?

73, Guy.

On Thu, Aug 5, 2010 at 9:37 PM, Jim Woodson <[hidden email]> wrote:
> Thanks Dick, K6KR.
> That was the issue.
> Changed the CONFIG:MEM to "nor" and everything started working great.
Thanks

> again. It always seams to be something simple we overlook as the problem.
> Jim
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html