Elecraft

K3 Memory Question

Classic

List

Threaded

6 messages Options

Larry Boekeloo

K3 Memory Question

I have my K3 memories setup so I can hop and skip around the bands and modes. I use the K3 memory manager and it works well. For instance 20 mtrs:

14.005 CW - Memory 27

14.080 FSK D - Memory 28

14.195 USB - Memory 29

On 30 mtrs I have:

10.105 CW - Memory 24

10.120 CW - Memory 25

10.140 FSK D - Memory 26

However, every time I go to 10.140 (Memory 26) I have to change the K3 from DATA A to FSK D. I've deleted the memory, rewritten it but it won't stay on FSK D I have every band set up like that and 30 mtrs is the only one I have trouble with. Has anyone seen this or know what I've done incorrectly?

Thanks.

Larry, KN8N
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Elecraft mailing list

Re: K3 Memory Question

I also had one that did that I wound up just correcting it on the radio

From: Larry Boekeloo <[hidden email]>
To: "[hidden email]" <[hidden email]>
Sent: Saturday, January 24, 2015 8:34 PM
Subject: [Elecraft] K3 Memory Question

I have my K3 memories setup so I can hop and skip around the bands and modes. I use the K3 memory manager and it works well. For instance 20 mtrs:

14.005 CW - Memory 27

14.080 FSK D - Memory 28

14.195 USB - Memory 29

On 30 mtrs I have:

10.105 CW - Memory 24

10.120 CW - Memory 25

10.140 FSK D - Memory 26

However, every time I go to 10.140 (Memory 26) I have to change the K3 from DATA A to FSK D. I've deleted the memory, rewritten it but it won't stay on FSK D I have every band set up like that and 30 mtrs is the only one I have trouble with. Has anyone seen this or know what I've done incorrectly?

Thanks.

Larry, KN8N
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

NK7Z

Re: K3 Memory Question

You are more than likely using BANK A and programming Bank B, or
vice-verse, with both programed the same this can happen.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info

On Sun, 2015-01-25 at 03:25 +0000, Harry Yingst via Elecraft wrote:

> I also had one that did that I wound up just correcting it on the radio
>
>
> From: Larry Boekeloo <[hidden email]>
> To: "[hidden email]" <[hidden email]>
> Sent: Saturday, January 24, 2015 8:34 PM
> Subject: [Elecraft] K3 Memory Question
>
> I have my K3 memories setup so I can hop and skip around the bands and modes. I use the K3 memory manager and it works well. For instance 20 mtrs:
>
> 14.005 CW - Memory 27
>
> 14.080 FSK D - Memory 28
>
> 14.195 USB - Memory 29
>
>
> On 30 mtrs I have:
>
> 10.105 CW - Memory 24
>
> 10.120 CW - Memory 25
>
> 10.140 FSK D - Memory 26
>
>
> However, every time I go to 10.140 (Memory 26) I have to change the K3 from DATA A to FSK D. I've deleted the memory, rewritten it but it won't stay on FSK D I have every band set up like that and 30 mtrs is the only one I have trouble with. Has anyone seen this or know what I've done incorrectly?
>
> Thanks.
>
> Larry, KN8N
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

Elecraft mailing list

Re: K3 Memory Question

as in both vfo A and B being programmed the same?

From: David Cole <[hidden email]>
To: [hidden email]
Sent: Saturday, January 24, 2015 10:33 PM
Subject: Re: [Elecraft] K3 Memory Question

You are more than likely using BANK A and programming Bank B, or
vice-verse, with both programed the same this can happen.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info

On Sun, 2015-01-25 at 03:25 +0000, Harry Yingst via Elecraft wrote:

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

NK7Z

Re: K3 Memory Question

Hi,
No... There are TWO banks of CW memory. Not VFO, but banks of memory
for CW... Look at the programming tool, and you will see BANK 1 and
BANK 2.

Press and hold REC button on your K3 to switch between BANK 1, and BANK
2.

--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info

On Sun, 2015-01-25 at 03:55 +0000, Harry Yingst wrote:

> as in both vfo A and B being programmed the same?
>
>
>
>
>
>
>
>
> ______________________________________________________________________
> From: David Cole <[hidden email]>
> To: [hidden email]
> Sent: Saturday, January 24, 2015 10:33 PM
> Subject: Re: [Elecraft] K3 Memory Question
>
>
> You are more than likely using BANK A and programming Bank B, or
> vice-verse, with both programed the same this can happen.
> --
> Thanks and 73's,
> For equipment, and software setups and reviews see:
> www.nk7z.net
> for MixW support see;
> http://groups.yahoo.com/neo/groups/mixw/info
> for Dopplergram information see:
> http://groups.yahoo.com/neo/groups/dopplergram/info
> for MM-SSTV see:
> http://groups.yahoo.com/neo/groups/MM-SSTV/info
>
>
> On Sun, 2015-01-25 at 03:25 +0000, Harry Yingst via Elecraft wrote:
> > I also had one that did that I wound up just correcting it on the
> radio
> >
> >
> > From: Larry Boekeloo <[hidden email]>
> > To: "[hidden email]" <[hidden email]>
> > Sent: Saturday, January 24, 2015 8:34 PM
> > Subject: [Elecraft] K3 Memory Question
> >
> > I have my K3 memories setup so I can hop and skip around the bands
> and modes. I use the K3 memory manager and it works well. For
> instance 20 mtrs:
> >
> > 14.005 CW - Memory 27
> >
> > 14.080 FSK D - Memory 28
> >
> > 14.195 USB - Memory 29
> >
> >
> > On 30 mtrs I have:
> >
> > 10.105 CW - Memory 24
> >
> > 10.120 CW - Memory 25
> >
> > 10.140 FSK D - Memory 26
> >
> >
> > However, every time I go to 10.140 (Memory 26) I have to change the
> K3 from DATA A to FSK D. I've deleted the memory, rewritten it but it
> won't stay on FSK D I have every band set up like that and 30 mtrs is
> the only one I have trouble with. Has anyone seen this or know what
> I've done incorrectly?
> >
> > Thanks.
> >
> > Larry, KN8N
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:[hidden email]
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to [hidden email]
> >
> >
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:[hidden email]
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to [hidden email]
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
>
>
>

Dick Dievendorff-4

Re: K3 Memory Question

I think we may be confusing different kinds of memory.

There are CW message memories, in two banks.

There are frequency memories that store VFO frequencies and modes, more than a hundred of these...

There are also memories for storing strings of commands (macros).

Dick, K6KR

> On Jan 25, 2015, at 08:36, David Cole <[hidden email]> wrote:
>
> Hi,
> No... There are TWO banks of CW memory. Not VFO, but banks of memory
> for CW... Look at the programming tool, and you will see BANK 1 and
> BANK 2.
>
> Press and hold REC button on your K3 to switch between BANK 1, and BANK
> 2.
>
> --
> Thanks and 73's,
> For equipment, and software setups and reviews see:
> www.nk7z.net
> for MixW support see;
> http://groups.yahoo.com/neo/groups/mixw/info
> for Dopplergram information see:
> http://groups.yahoo.com/neo/groups/dopplergram/info
> for MM-SSTV see:
> http://groups.yahoo.com/neo/groups/MM-SSTV/info
>
>
>> On Sun, 2015-01-25 at 03:55 +0000, Harry Yingst wrote:
>> as in both vfo A and B being programmed the same?
>>
>>
>>
>>
>>
>>
>>
>>
>> ______________________________________________________________________
>> From: David Cole <[hidden email]>
>> To: [hidden email]
>> Sent: Saturday, January 24, 2015 10:33 PM
>> Subject: Re: [Elecraft] K3 Memory Question
>>
>>
>> You are more than likely using BANK A and programming Bank B, or
>> vice-verse, with both programed the same this can happen.
>> --
>> Thanks and 73's,
>> For equipment, and software setups and reviews see:
>> www.nk7z.net
>> for MixW support see;
>> http://groups.yahoo.com/neo/groups/mixw/info
>> for Dopplergram information see:
>> http://groups.yahoo.com/neo/groups/dopplergram/info
>> for MM-SSTV see:
>> http://groups.yahoo.com/neo/groups/MM-SSTV/info
>>
>>
>>> On Sun, 2015-01-25 at 03:25 +0000, Harry Yingst via Elecraft wrote:
>>> I also had one that did that I wound up just correcting it on the
>> radio
>>>
>>>
>>> From: Larry Boekeloo <[hidden email]>
>>> To: "[hidden email]" <[hidden email]>
>>> Sent: Saturday, January 24, 2015 8:34 PM
>>> Subject: [Elecraft] K3 Memory Question
>>>
>>> I have my K3 memories setup so I can hop and skip around the bands
>> and modes. I use the K3 memory manager and it works well. For
>> instance 20 mtrs:
>>>
>>> 14.005 CW - Memory 27
>>>
>>> 14.080 FSK D - Memory 28
>>>
>>> 14.195 USB - Memory 29
>>>
>>>
>>> On 30 mtrs I have:
>>>
>>> 10.105 CW - Memory 24
>>>
>>> 10.120 CW - Memory 25
>>>
>>> 10.140 FSK D - Memory 26
>>>
>>>
>>> However, every time I go to 10.140 (Memory 26) I have to change the
>> K3 from DATA A to FSK D. I've deleted the memory, rewritten it but it
>> won't stay on FSK D I have every band set up like that and 30 mtrs is
>> the only one I have trouble with. Has anyone seen this or know what
>> I've done incorrectly?
>>>
>>> Thanks.
>>>
>>> Larry, KN8N
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to [hidden email]
>>>
>>>
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to [hidden email]
>>
>>
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]