Hello Pete,
The rear panel mic jack is a stereo (T-R-S) jack with the mono mic signal on the tip. The ring is not connected. It is an unbalanced input and accepts balanced or unbalanced dynamic mics but only unbalanced electret condenser mics. When RL.X bias is on, it supplies 8 volts.
You can glean most of this by perusing the schematics. You can also see a summary of all the KIO3 connections in the chapter 7 sampler for the KE7X K3 book. Have a look at www.ke7x.com.
Cheers and 73,
Fred KE7X
"The Elecraft K3: Design, Configuration and Operation"
www.ke7x.com
-----Original Message-----
From:
[hidden email] on behalf of Pete Meier
Sent: Fri 12/23/2011 9:24 AM
To:
[hidden email]
Subject: [Elecraft] K3 Mic input rear panel
What is the pinout for K3 rear panel mic input? Looking for how to wire a mic. Didn't see it in the manual.
Off-the-shelf mic does seem to work even with K3 set to use rear panel mic.
Pete Meier
[hidden email]
Amateur Radio Callsign: WK8S
|| If you make people think they're thinking, they'll love you. But if you really make them think, they'll hate you - Don Marquis ||
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
