K3, Mixw, Rigexpert, and Vista problem

[Ken817821]

I'm trying to get things going on VISTA.

I downloaded the VISTA version of the RE and MIXW driver.

I used VISTA Device Manager to set USB Serial port to be 13, 4800 baud.

I used MIXW to set Kenwood, K2 model, com 13, 4800 baud.

When I bring up MIXW I get message indicating com13 is already in use.

Has anyone gone thru this?

Ken K5WK

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Hello Ken,
If your using rigexpert with the mixw software you have to set the soundcard to "rigexpert" first. then when you go to "cat interface" it will show the "rig expert".
I had it working great. I now use a Navigator interface. But the rigexpert was all I needed..

Don...w2xb


 

Kenneth Waites wrote

I'm trying to get things going on VISTA.
I downloaded the VISTA version of the RE and MIXW driver.
I used VISTA Device Manager to set USB Serial port to be 13, 4800 baud.
I used MIXW to set Kenwood, K2 model, com 13, 4800 baud.
When I bring up MIXW I get message indicating com13 is already in use.
Has anyone gone thru this?

Ken K5WK
_______________________________________________
Elecraft mailing list
Post to: [e-mail]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com