K3 --> N1MM Logger

[John Lyon-4]

Hi all,

I'm having trouble keying the K3 with N1MM Logger. I use MicroHam CW Keyer. It works fine with AC Log, both rig control and CW Keying.
The rig control with N1MM Logger works fine. But CW keying doesn't. I have attempted to configure CW as follows: check the CW box,
Com port 4800, N, 8, 2. DTR and RTS to Always Off (thought that was the Elecraft preference), and  the Winkey box checked.
Sometimes this works, sometimes not.

Every time I reenter N1MM, it has always been reset to DTR Always On, RTS Alway Off, and Winkey unchecked.

Would appreciate a note off line with anyone who has made it work.

73,

John W9LHG

   
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Joe Subich, W4TV-3]

WinKey and the K3 can not share the same port.

N1MM enforces the WinKey settings at 1200 bps (value set does
not matter) DTR=ON RTS=OFF because the DTR=ON and RTS=OFF are
required by the stand alone K1EL serial WinKey.

You must not have any port checked for CW EXCEPT the port
being used by WinKey.

73,

   ... Joe, W4TV
 
 

> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of
> [hidden email]
> Sent: Wednesday, July 16, 2008 11:54 AM
> To: [hidden email]
> Subject: [Elecraft] K3 --> N1MM Logger
>
>
> Hi all,
>
> I'm having trouble keying the K3 with N1MM Logger. I use
> MicroHam CW Keyer. It works fine with AC Log, both rig
> control and CW Keying. The rig control with N1MM Logger works
> fine. But CW keying doesn't. I have attempted to configure CW
> as follows: check the CW box, Com port 4800, N, 8, 2. DTR and
> RTS to Always Off (thought that was the Elecraft preference),
> and  the Winkey box checked.
> Sometimes this works, sometimes not.
>
> Every time I reenter N1MM, it has always been reset to DTR
> Always On, RTS Alway Off, and Winkey unchecked.
>
> Would appreciate a note off line with anyone who has made it work.
>
> 73,
>
> John W9LHG
>
>    
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft   
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com