[K3] N3fjp rig control

[Gene-7]

As a follow up to my last post, (should be N3fjp, NOT N3flp), Bill, NR4C
asked why connection power RTS is needed.

I don't know however I was just following the recommended list in the
successful list settings shown on the AClog website.  I decided to try
the setting, connection power = none, and it still works.

Thanks Bill, for asking.

73, Gene
W2BXR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Joe Subich, W4TV-4]

Connection power is only needed for some RS-232 to TTL or CI-V
converters that require "interface power" and do not provide an
external power supply.  Those interfaces are generally used only
for Icom and older Yaesu/Kenwood radios and are certainly not
applicable to the K2 or K3 which use simple three wire RS-232
(bipolar voltage) interfaces.

73,

    ... Joe, W4TV


On 2014-11-14 6:49 PM, Gene wrote:

> As a follow up to my last post, (should be N3fjp, NOT N3flp), Bill, NR4C
> asked why connection power RTS is needed.
>
> I don't know however I was just following the recommended list in the
> successful list settings shown on the AClog website.  I decided to try
> the setting, connection power = none, and it still works.
>
> Thanks Bill, for asking.
>
> 73, Gene
> W2BXR
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]