K3 - No Power Out, Error Message "ERR PL-1"

[Ed Gilliland]

No power out

5W calibration fails

The error message "ERR PL-1" appears briefly when I change bands.

Thanks for the help.

Ed

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Ed,

Turn to page 70 in the K3 manual and try the correction steps listed for
the ERR PL-1 error.

If that does not correct it, contact K3support for further steps.

73,
Don W3FPR

On 6/21/2017 8:53 AM, Ed Gilliland wrote:
> No power out
>
> 5W calibration fails
>
> The error message "ERR PL-1" appears briefly when I change bands.
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]