K3 No RF output
Locked
 
|
I am getting 0 RF output from my K3 on all bands regardless of the commanded
power level. Pressing the TX button results in -- where the SWR would normally be displayed. Any suggestions or ideas on how to resolve this issue are greatly appreciated. Thanks Gregg w6izt ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
It means TX Inh(ibit) has been activated. Check your menu setting.
73, Rick, WA6NHC iPad = small keypad = typos = sorry ;-) > On Nov 9, 2014, at 10:14 AM, Gregg W6IZT <[hidden email]> wrote: > > I am getting 0 RF output from my K3 on all bands regardless of the commanded > power level. Pressing the TX button results in -- where the SWR would > normally be displayed. > > Any suggestions or ideas on how to resolve this issue are greatly > appreciated. > > Thanks > Gregg w6izt > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
In reply to this post by gregg.w6izt1
Gregg, did you accidentally put your rig into test mode? Are the antennas
connected? Good luck finding the problem source. 73 de, --Ian Ian Kahn, KM4IK Roswell, GA EM74ua [hidden email] 10-10 #74624, North Georgia Chapter #2038 K3# 281, P3 #688, KPA500 #1468 -----Original Message----- From: Elecraft [mailto:[hidden email]] On Behalf Of Gregg W6IZT Sent: Sunday, November 9, 2014 1:15 PM To: [hidden email] Subject: [Elecraft] K3 No RF output I am getting 0 RF output from my K3 on all bands regardless of the commanded power level. Pressing the TX button results in -- where the SWR would normally be displayed. Any suggestions or ideas on how to resolve this issue are greatly appreciated. Thanks Gregg w6izt ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
Looks like I lost a PIN diode in the TR switch, I've ordered replacements.
Thanks to all who replied. Gregg -----Original Message----- From: Ian - Ham [mailto:[hidden email]] Sent: Sunday, November 09, 2014 18:23 PM To: 'Gregg W6IZT'; [hidden email] Subject: RE: [Elecraft] K3 No RF output Gregg, did you accidentally put your rig into test mode? Are the antennas connected? Good luck finding the problem source. 73 de, --Ian Ian Kahn, KM4IK Roswell, GA EM74ua [hidden email] 10-10 #74624, North Georgia Chapter #2038 K3# 281, P3 #688, KPA500 #1468 -----Original Message----- From: Elecraft [mailto:[hidden email]] On Behalf Of Gregg W6IZT Sent: Sunday, November 9, 2014 1:15 PM To: [hidden email] Subject: [Elecraft] K3 No RF output I am getting 0 RF output from my K3 on all bands regardless of the commanded power level. Pressing the TX button results in -- where the SWR would normally be displayed. Any suggestions or ideas on how to resolve this issue are greatly appreciated. Thanks Gregg w6izt ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |