I operated in the 10 meter contest for several hours yesterday using my K3
and laptop computer using N1MM. I noticed low audio and increased it by
going to the Hi setting in the config menu. It helped some but audio still
seemed low. Speaker audio finally failed completely. Also, a component(s)
somewhere smoked as I noticed a whisp of smoke rising from the ventilation
slots near the PA. I quickly pulled all power to the radio. I have pretty
much dismantled the K3 except for the front panel and cannot find any
damaged components.
After reassembling the K3 and powering it up and all seems to work
normally except there is no speaker audio. I noticed a similar failure
occured with the K3 tested by the ARRL and mentioned in their report in
January QST. My next step will be to pull the front panel off and check out
the DSP board.
I would really appreciate any ideas.
Todd, WA7U
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
