K3 Noise Reduction

[Don Wilhelm-4]

Tom,

If you want smaller than the K3, the EC1 and EC2 enclosures sound like
what you may be looking for.  Of course, they are K2 gray color, but a
bit of spray paint can change them to K3 black (but with a wrinkle texture).

Of course, there is alway the TenTec enclosures if the EC1 and EC2 do
not fit the bill - and several other enclosures are available from the
catalog pages of Mouser and DigiKey.

73,
Don W3FPR

Radio Amateur N5GE wrote:

> On Fri, 1 May 2009 11:20:30 -0700, wayne burdick <[hidden email]>
> wrote:
>
> [snip]
>
>  
>> We also sell blank project enclosures styled to match the K2 (EC2) and
>> K1 (EC1). There are two different height tilt stands for the EC2: ETS15
>> (1.5") and ETS2 (2.5"). You'll find these on our order page.
>>
>> 73,
>> Wayne
>> N6KR
>>    
> [snip]
>
> I'd like to see some small enclosures for things like the home brew
> "in shack" end of things like coaxial switching units, Mic switching
> assemblies, etc. (4x3x2", 4x6x3", etc.)
>
> Now that I have two k3 XCVR's I'd like to construct some Mic switching
> assemblies, etc.
>
>  For my VHF UHF activities I'd like to have a small enclosure for
> switching coaxial relays up on the tower.
>
> Tom, N5GE
> K3 #806, K3 #1055
> XV144, XV432
> W1 and other small kits.
> http://www.n5ge.com
>  
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[N5GE]

On Fri, 01 May 2009 23:29:53 -0400, Don Wilhelm <[hidden email]>
wrote:

>Tom,
>
>If you want smaller than the K3, the EC1 and EC2 enclosures sound like
>what you may be looking for.  Of course, they are K2 gray color, but a
>bit of spray paint can change them to K3 black (but with a wrinkle texture).
>
>Of course, there is alway the TenTec enclosures if the EC1 and EC2 do
>not fit the bill - and several other enclosures are available from the
>catalog pages of Mouser and DigiKey.
>
>73,
>Don W3FPR
>

[snip]

Thanks, Don.  I'll take a look at them.

Now to bed.
Going to Oklahoma in the morning to look at some possible rover sites
for VHF/UHF.

73,

Tom, N5GE
K3 #806, K3 #1055
XV144, XV432
W1 and other small kits.
http://www.n5ge.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html