K3 Noise blanker board

[VE3WDM]

Good morning all
Almost finished putting the K3 all together but last night I did notice while putting the NB board on the 8th pin from the left was missing. I ended up plugging it into the main board but will wait to find out if this is intentional or defective before I power up the unit.
Thanks
Mike
VE3WDM
     
_________________________________________________________________
Windows Live: Friends get your Flickr, Yelp, and Digg updates when they e-mail you.
http://go.microsoft.com/?linkid=9691817
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Bob Cunnings NW8L]

Well, according to the K3 schematic, pin 5 of the connector shows 'no
connection'. This would be the 8th pin from one end.

Bob NW8L

On Wed, Dec 9, 2009 at 4:14 AM, Mike Weir <[hidden email]> wrote:
>
> Good morning all
> Almost finished putting the K3 all together but last night I did notice while putting the NB board on the 8th pin from the left was missing. I ended up plugging it into the main board but will wait to find out if this is intentional or defective before I power up the unit.
> Thanks
> Mike
> VE3WDM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html