Once you have the K3 set up the way you like it, you should save your
EEPROM parameters. This will allow you to restore the setup easily.
Normally this would not be necessary, but it's a good idea to have the
configuration file around, just in case.
A K3 configuration file can even be used to "clone" one K3's setup to
another rig with the same options and crystal filters.
To save the configuration: Run K3 Utility, click on the
"Configuration" tab, then click on "Save K3 Configuration." K3 Utility
names the file based on the current date and time and your K3's serial
number. If you ever restore the configuration, be sure to use the
latest file.
73,
Wayne
N6KR
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
