Oh for crying out loud, Tom... you give them a correction and then
SCREW IT UP YOURSELF!
CORRECTION TO BE MADE TO YOUR K3 OWNER'S manual NOT the K2 Manual.
Sorry guys.
Never claimed to be a good typist.
Thanks,
Tom
At 18:59 03/04/2008,
[hidden email] wrote:
>Make a correction to my "K2" Owner's Manual????????
>
>Chuck Bland
>NA6BR
>
>= = = Original message = = =
>
>Folks:
>
>Just to no one will go off in the wrong direction when attempting to connect
>to the K3's RS-232 port...
>
>On page 18 of the K3 Owner's Manual, The table associated with RS-232 shows:
>
>
> Pin # Description
> 1,6,8,9 Not used
> 2 RXD IN (data to PC from K3)
> 3 TXD OUT (data to K3 from PC)
> 4 DTR (see PTT and Keying, below)
> 5 Ground (RF isolated)
> 6 RTS (see PTT and Keying, below)
>
>Obviously, pin 6 can't be 'Not Used' AND RTS at the same time...!
>
>RTS should be assigned to pin 7, and pin 6 really is NOT USED.
>
>Please make a pencil correction to your K2 Owner Manual.
>
>73,
>
>Tom Hammond N0SS
>
>
>_______________________________________________
>Elecraft mailing list
>Post to:
[hidden email]
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
>
http://mailman.qth.net/mailman/listinfo/elecraft>
>Help:
http://mailman.qth.net/subscribers.htm>Elecraft web page:
http://www.elecraft.com>
>
>
>
>___________________________________________________________
>Sent by ePrompter, the premier email notification software.
>Free download at
http://www.ePrompter.com.
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
