[K3][P3] 6m Preamp and P3 on AUX Pwr

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

[K3][P3] 6m Preamp and P3 on AUX Pwr

M0XDF
I've seen the postings about providing power from the K3 Aux 12v socket - is there enough to drive the 6m Pre-amp and the P3?
73 de M0XDF, K3 #174, P3 #108
--
Don't say you don't have enough time. You have exactly the same number of
hours per day that were given to Helen Keller, Pasteur, Michaelangelo,
Mother Teresa, Leonardo da Vinci, Thomas Jefferson, and Albert Einstein.
-H. Jackson Brown, Jr., writer

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: [K3][P3] 6m Preamp and P3 on AUX Pwr

wayne burdick
Administrator
Yes. The 12 V aux current should be kept below 500 mA, and the P3+PR6  
should be well below this.

Wayne
N6KR


On Aug 21, 2010, at 1:56 AM, David Ferrington, M0XDF wrote:

> I've seen the postings about providing power from the K3 Aux 12v  
> socket - is there enough to drive the 6m Pre-amp and the P3?
> 73 de M0XDF, K3 #174, P3 #108
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: [K3][P3] 6m Preamp and P3 on AUX Pwr

M0XDF
Thanks Wayne - just need to make a 'Y' lead now :-)
73 de M0XDF, K3 #174, P3 #108
--
Why should I fear death? If I am, death is not. If death is, I am not. Why
should I fear that which cannot exist when I do?
-Epicurus, philosopher (c. 341-270 BCE)

On 21 Aug 2010, at 17:20, Wayne Burdick wrote:

> Yes. The 12 V aux current should be kept below 500 mA, and the P3+PR6 should be well below this.
>
> Wayne
> N6KR
>
>
> On Aug 21, 2010, at 1:56 AM, David Ferrington, M0XDF wrote:
>
>> I've seen the postings about providing power from the K3 Aux 12v socket - is there enough to drive the 6m Pre-amp and the P3?
>> 73 de M0XDF, K3 #174, P3 #108

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html