[K3][P3] 6m Preamp and P3 on AUX Pwr

[Ken Kopp-3]

I've answered my own question ...

No, the three units add up to about 1.2A ... Far too
much current for the 12VDC OUT jack to support.

73! Ken - K0PP

>
> Would it be "safe" to add the W2 to this mix?
>
> K0PP
>
>
>> Yes. The 12 V aux current should be kept below 500 mA, and the P3+PR6  
>> should be well below this.
>>
>> Wayne
>> N6KR
>>
>>
>> On Aug 21, 2010, at 1:56 AM, David Ferrington, M0XDF wrote:
>>
>>> I've seen the postings about providing power from the K3 Aux 12v  
>>> socket - is there enough to drive the 6m Pre-amp and the P3?
>>> 73 de M0XDF, K3 #174, P3 #108

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html