I'd like to try SO2V mode, but VFO B must be used for tuning around, as
only the subreceiver can be automatically silenced when someone answers
a CQ. (The main receiver does not need to be silenced often, because
one wouldn't be listening to the subreceiver if someone were calling.)
However, it would be really useful to be able to see CW signals on the
P3, with a 10 kHz span, when tuning the band with VFO B. As far as I
can tell, the P3 only tracks VFO A, so nothing can be seen if VFO B is
outside the span range. Is there a way to make it keep the VFO B cursor
on the screen, in both the tracking and fixed modes, without setting the
span wider?
If worse comes to worst, I can use a foot switch to switch the audio
between receivers, but I'd rather not.
73,
Scott K9MA
--
Scott K9MA
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
