> I use a USB to RS232 8 port multi-port adapter. My K3 & P3 share one
> port assignment via a wye cable. I have used this setup for about 2
> years.
K3/P3 should not use a Y adapter - the design is for series connection.
Computer connects to the RS-232 input of P3, P3 RS-232 output connects
to the RS-232 input of K3 using the cable supplied with the P3. Set
both units and the computer (logging software) for 38,400 bps for best
results.
There is a significant amount of K3 <-> P3 traffic on the RS-232 link
that the computer has no need to see and will cause collisions/issues
with logging software that does not understand the undocumented data.
73,
... Joe, W4TV
On 8/20/2013 9:49 AM, Jack Berry wrote:
> Do others see continual traffic from K3/P3 connections.
>
> I now notice continual flashing green & yellow port "traffic lights" related to my K3/P3 connections. Before reinstalling all software and devices on a failed Win7 installation, I remember less frequent flashing. I'm thinking collisions on the shared port.
>
> First thing that comes to mind is a change in the installation but I can't find it.
>
> I use a USB to RS232 8 port multi-port adapter. My K3 & P3 share one port assignment via a wye cable. I have used this setup for about 2 years.
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
