K3 PSK31 with Direct FSK Keying

[Cady, Fred]

Hi all,
Can anybody recommend a PSK31 software package that will key the K3
using PSK D mode with direct keying instead of an audio input? Have it
set up that way for RTTY with MMTTY and would like to continue.
Thanks.
Fred
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail.
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Julian, G4ILO]

Cady, Fred wrote

Hi all,
Can anybody recommend a PSK31 software package that will key the K3
using PSK D mode with direct keying instead of an audio input? Have it
set up that way for RTTY with MMTTY and would like to continue.
Thanks.
Fred

You can generate RTTY using direct FSK keying but it is not possible to generate PSK31 the same way. PSK31 is not a simple two-tone signal like RTTY. My program KComm can use the PSK D and FSK D modes but these modes work by using the K3 command protocol to send ASCII text to the K3, which then creates the RTTY or PSK modulation using DSP.