K3 Paddle RTTY

[Elecraft mailing list]

It's been ages since I tried sending RTTY from my K3 using paddles; I've  
been using a SignaLink USB for RTTY for the past couple years! Anyway, I  set
up the K3 for FSK D, plugged the paddle into the paddle socket on the back  
of the K3, and no RTTY!
So I checked cabling, etc., and still no RTTY using paddles. I switched  
over to CW mode and CW worked just fine! Back to FSK D and no RTTY. I have my  
call in an M1 macro, so I pushed M1 and got RTTY (text decoded properly!).
Then  I tried the paddles again -- nothing! So I pressed M1 and after my
call was sent  and the FSK was "diddling", my paddles worked! When the diddling
stopped, the  paddles no longer produced RTTY.
What am I missing here?
Bert, N4CW
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Mike Harris-9]

Hi,

Discovered the same a couple of days ago but hadn't got around to
investigating it.  Don't know when it started but FWIW running 04.93
family firmware.

Regards,

Mike VP8NO

On 10/12/2014 22:46, Bert via Elecraft wrote:

> It's been ages since I tried sending RTTY from my K3 using paddles; I've
> been using a SignaLink USB for RTTY for the past couple years! Anyway, I  set
> up the K3 for FSK D, plugged the paddle into the paddle socket on the back
> of the K3, and no RTTY!
> So I checked cabling, etc., and still no RTTY using paddles. I switched
> over to CW mode and CW worked just fine! Back to FSK D and no RTTY. I have my
> call in an M1 macro, so I pushed M1 and got RTTY (text decoded properly!).
> Then  I tried the paddles again -- nothing! So I pressed M1 and after my
> call was sent  and the FSK was "diddling", my paddles worked! When the diddling
> stopped, the  paddles no longer produced RTTY.
> What am I missing here?
> Bert, N4CW

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Oliver Dröse]

VOX on?

73, Olli

Contest, DX & radio projects: http://www.dh8bqa.de


Am 11.12.2014 02:46, schrieb Bert via Elecraft:

> It's been ages since I tried sending RTTY from my K3 using paddles; I've
> been using a SignaLink USB for RTTY for the past couple years! Anyway, I  set
> up the K3 for FSK D, plugged the paddle into the paddle socket on the back
> of the K3, and no RTTY!
> So I checked cabling, etc., and still no RTTY using paddles. I switched
> over to CW mode and CW worked just fine! Back to FSK D and no RTTY. I have my
> call in an M1 macro, so I pushed M1 and got RTTY (text decoded properly!).
> Then  I tried the paddles again -- nothing! So I pressed M1 and after my
> call was sent  and the FSK was "diddling", my paddles worked! When the diddling
> stopped, the  paddles no longer produced RTTY.
> What am I missing here?
> Bert, N4CW
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]