K3 Panadaptor Question

[Corboy - Poteet]

I was thinking (dangerous activity and very difficult at my age) about
the K3 Panadaptor/Band Scope.

I realize the Panadaptor is downstream (2008?) and these questions may
have already been broached and are in the archives but ...

1) I wonder if it would be possible to mount the Panadaptor as a
"flip-up" device on the top of the K3 cabinet? In use it would be up
and in my line-of-sight; down, the face would be protected and out of
the way.

2) Are there plans to allow the decoded PSK/RTTY/CW output to be
routed to the Panadaptor screen (while turning off the band activity
display of course)?

3) Similarly, will it be possible to route the echo output from the
(mini Elecraft) keyboard (K3KBD?) to the Panadaptor screen?  Split
screen between input/output.


Questions (2) and (3) are partially in deference to the average K3
buyer who, I suspect, last saw the age of 25 several decades ago.
Mostly I am thinking more characters with bigger fonts.


Mike    W5FTD



_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Jack Smith-6]

The list has recently had posts concerning the importance of decent
probes to get the most out of your oscilloscope.  But, the ground lead
connection between the probe tip and the circuit under examination
cannot be ignored.

I've provided a few photographs illustrating the importance of short
ground connections to your scope probe in my July 10th comments at
http://www.cliftonlaboratories.com/Updates.htm.

Jack K8ZOA
www.cliftonlaboratories.com

>
>  

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com