K3 Panoramic display kit (LP-Pan, EMU-0202)

[Mike Schwendeman]

Good day;

     I have a "kit" of major components that will add a panoramic
display to your Elecraft K3 radio; -It consists of  the following:

- LP-Pan SDR that "receives" the K3's IF (8.215 Mhz?) signal
- Clifton Labs RF preamp that amplifies the K3's IF signal
- E-MU-0202 USB sound card
- Stereo audio ISOLATION TRANSFORMER unit
- Misc. cables, connectors

Now set up for operation with an Elecraft K3.
(Verified operation on a friend's K3!)
No documentation; If I find the doc, I will include, of course.

Downloads, information, etc. here:
   www.*telepost*inc.com/
www.telepostinc.com/*emu0202*.html
www.*cliftonlaboratories*.com/Documents.htm

$225 for all mentioned above, shipped to the USA.

Thank you, and 73;  -Mike-   KØJTA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Matt Zilmer]

The docs are on the web site.

matt W6NIA

On Fri, 29 Mar 2013 21:08:42 -0500, you wrote:

>Good day;
>
>     I have a "kit" of major components that will add a panoramic
>display to your Elecraft K3 radio; -It consists of  the following:
>
>- LP-Pan SDR that "receives" the K3's IF (8.215 Mhz?) signal
>- Clifton Labs RF preamp that amplifies the K3's IF signal
>- E-MU-0202 USB sound card
>- Stereo audio ISOLATION TRANSFORMER unit
>- Misc. cables, connectors
>
>Now set up for operation with an Elecraft K3.
>(Verified operation on a friend's K3!)
>No documentation; If I find the doc, I will include, of course.
>
>Downloads, information, etc. here:
>   www.*telepost*inc.com/
>www.telepostinc.com/*emu0202*.html
>www.*cliftonlaboratories*.com/Documents.htm
>
>$225 for all mentioned above, shipped to the USA.
>
>Thank you, and 73;  -Mike-   KØJTA
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Mike Schwendeman]

Matt;
OK, and thanks for this info.  I had not looked; -I am not an owner of a
K3; I simply LOANED my LP-Pan to a K3 owner for verification that it worked.

I believe I had miss-copied the links, so I will offer again:
http://www.telepostinc.com/emu0202.html
http://www.cliftonlaboratories.com/Documents.htm

Jim KGØ--;
The isolation was good (offered help) for me, with my KX3.  This is not
needed for the K3, per your information.  (I had assumed that the
isolation was a commonly needed item, per my experience with SoftRock,
KX3, etc.)

     Thank you both for the help!  Much appreciated!  73;  -Mike- KØJTA


On 3/29/13 9:13 PM [Mar 29], Matt Zilmer wrote:

> The docs are on the web site.
>
> matt W6NIA
>
> On Fri, 29 Mar 2013 21:08:42 -0500, you wrote:
>
>> Good day;
>>
>>      I have a "kit" of major components that will add a panoramic
>> display to your Elecraft K3 radio; -It consists of  the following:
>>
>> - LP-Pan SDR that "receives" the K3's IF (8.215 Mhz?) signal
>> - Clifton Labs RF preamp that amplifies the K3's IF signal
>> - E-MU-0202 USB sound card
>> - Stereo audio ISOLATION TRANSFORMER unit
>> - Misc. cables, connectors
>>
>> Now set up for operation with an Elecraft K3.
>> (Verified operation on a friend's K3!)
>> No documentation; If I find the doc, I will include, of course.
>>
>> Downloads, information, etc. here:
>>    www.*telepost*inc.com/
>> www.telepostinc.com/*emu0202*.html
>> www.*cliftonlaboratories*.com/Documents.htm
>>
>> $225 for all mentioned above, shipped to the USA.
>>
>> Thank you, and 73;  -Mike-   KØJTA
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Mike Schwendeman]

The LP-Pan kit has been sold.  Thank you to all that had emailed.
73;   -Mike-   KØJTA

On 3/29/13 10:33 PM [Mar 29], Mike Sch. (IMAP Acct.) wrote:

> Matt;
> OK, and thanks for this info.  I had not looked; -I am not an owner of
> a K3; I simply LOANED my LP-Pan to a K3 owner for verification that it
> worked.
>
> I believe I had miss-copied the links, so I will offer again:
> http://www.telepostinc.com/emu0202.html
> http://www.cliftonlaboratories.com/Documents.htm
>
> Jim KGØ--;
> The isolation was good (offered help) for me, with my KX3.  This is
> not needed for the K3, per your information.  (I had assumed that the
> isolation was a commonly needed item, per my experience with SoftRock,
> KX3, etc.)
>
>     Thank you both for the help!  Much appreciated!  73;  -Mike- KØJTA

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html