Sten,
Does not happen here.
73
Stewart G3RXQ
On Thu, 1 May 2008 08:10:41 +0000, IK2HKT - Sten wrote:
> Hi guys,
>
> I have trouble with my K3 when push power switch ON.
>
> If the RTX is switch OFF in SSB, AM or DATA mode and after is
power
>
> ON, everythink is ok.
>
> But if I power OFF the RTX in CW mode, when I push the power ON,
the audio
>
> on speaker or headphone is at maximum level for half second,
just the
>
> time to see all data on the diplay. After the audio go less
>
> accordly to the position of AF potentiomenter and everythink
work perfect.
>
> Seem to be a problem of "chek up" in the little time when the
power
>
> switch is push ON (and no information appear on the display).
>
> As soon as the diplay have information, the audio work
perfectly.
>
> I download the latest firmware, I tried several time with
different
> configuration
>
> (such as filters, only headphone, only speakers and others) but
the problem
> persist.
>
> Everytime switch off/on on SSB all is OK --- Only when in CW
mode the
>
> audio go to the max level just and half of second after the
power on switch
> is
>
> pressed.
>
> Any suggestion about this matter ? .... Some of you have note
the
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
