My K3 s/n 2324 has developed a problem with its output power. It is very
non-linear especially between 12 and say about 50 watts. Output is low until
about there and I do not get full output on some bands, for example I can
only get about 35 watts now on 6m. I have attempted to do the TX Gain
Calibration but is always fails. Elecraft tech support has advised me to try
the "three finger test" to test the KLPA3. I may have access to the PA board
of another K3.wondering if I could just swap them out to determine if that
is where the problem is??
Allen R. Brier N5XZ
1515 Windloch Lane
Richmond, TX 77406
713-705-4801
--
This email has been checked for viruses by AVG.
https://www.avg.com______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
