K3 Power Supply

[Randy Cook-2]

KN5L sez  'My plan is to try a Samlex 1223 or 1235 next. Reports are that the Samlex products have a quieter fan.'

Before you do, check on warranty repair policy. I bought a Samlex 1223 for my K3 from HRO. Samlex Corp was in BC, Canada, I believe.

It took a month to get my unit replaced when if failed in the warranty period. No quick-ship replacements, no phone support. The replaced unit died shortly after the 90 day replacement warranty.  This was a couple of years ago, so things may have changed. But, it's something to check into.

My current PowerWerx supply has been working well for a while, and is very quiet.

73

Randy Cook - K6CRC
[hidden email]




______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Bill Clarke]

Thank you for the heads up on the warranty problems.

I have decided to go again with a 35 amp analog Astron. Thanks to all
that responded. Nice to hear what other are using and how it works out.  
Never had a problem running everything from a single battery (been doing
it for many years) - mostly in RX mode for everything (HF, 2M and
scanner). Note, however, that I run a Kenwood TS480 during power outs.
It is far less fussy about low voltage than the K3 (my experience).

Thanks,

Bill W2BLC

--
IN GOD I TRUST (but, NOT a single politician)
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html