K3 - PowerSDR-IF "communication issue?"

[Bill Davis Jr]

  Hope someone can help. Downloaded PSDR-IF 1.19.02 last night to use with my K3 and my Softrock on the IF with a Clifton Labs buffer. No problem with using the panadapter centered on the IF. But when I selected the K3 IF setting in PSDR and hooked up the serial cable I expected to be able to do some K3 control via PSDR and that does not happen. The serial cable works fine with the K3 Utility. I'm guessing I have made a dumb error some where. Correct Com port (1) and only serial cable hooked to computer when I was trying it.

  Ideas? .... From PSDR-IF documentation it sounded like once the IF/K3 option was selected it should have been close to "plug and play". My serial cable is 2 conductor and ground. Again works fine with K3 Utility and I have Upgraded FirmWare etc with no issues.

  Thanks .. Bill  K0AWU  EN37ed  K3# 3460
     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Lee J. Imber (WW2DX)]

Hi Bill,

Try over here:

http://code.google.com/p/powersdr-if-stage/

73!

Lee
WW2DX

On Dec 15, 2009, at 12:54 PM, Bill Davis Jr wrote:

>
>  Hope someone can help. Downloaded PSDR-IF 1.19.02 last night to use with my K3 and my Softrock on the IF with a Clifton Labs buffer. No problem with using the panadapter centered on the IF. But when I selected the K3 IF setting in PSDR and hooked up the serial cable I expected to be able to do some K3 control via PSDR and that does not happen. The serial cable works fine with the K3 Utility. I'm guessing I have made a dumb error some where. Correct Com port (1) and only serial cable hooked to computer when I was trying it.
>
>  Ideas? .... From PSDR-IF documentation it sounded like once the IF/K3 option was selected it should have been close to "plug and play". My serial cable is 2 conductor and ground. Again works fine with K3 Utility and I have Upgraded FirmWare etc with no issues.
>
>  Thanks .. Bill  K0AWU  EN37ed  K3# 3460
>    
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html