[K3] Preamp and Attenuator Not on RX Antenna

[Pete Smith N4ZR]

 From some preliminary tests, it appears that neither the preamp or the
attenuator of my K3 operate when the RX antenna is selected.  Is this
correct/intended/selectable?

--

73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Joe Subich, W4TV-4]

The schematics available on the Elecraft web site show the attenuator
and preamp are located after the RX Ant switch.  I've just checked and
the Preamp/RX Ant selections are stored separately for the main and RX
antennas.

73,

    ... Joe, W4TV


On 4/2/2013 8:14 AM, Pete Smith N4ZR wrote:
>  From some preliminary tests, it appears that neither the preamp or the
> attenuator of my K3 operate when the RX antenna is selected.  Is this
> correct/intended/selectable?
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html