Group,
Problem Solved! Many thanks for all the suggestions. It turns out that the issue was much more simple than I imagined. I had no power t going to the KAT500. We had Severe Thunderstorm Warnings on Tuesday and I unplugged everything. Did not notice that the KAT500 was still without power when I started downloading the firmware to the KPA500. The result: The K3 wouldn’t turn ON properly when I tried to get on the air. Plugging the power plug back into the KAT500 rectified the issue. All is well with K3 S/N 280! The KPA500 has its new firmware. Thanks again for the help.
Roger Stimson K8RS
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
