K3 Programming question

[Barry]

How do I put the K3 in AI2 or AI3 mode?
I only see NORM and 1 as choices in the config menu for AUTOINF.  I am running the latest firmware (MCU 4.67), if that matters.

Barry W2UP

[Dick Dievendorff-4]

It's in the K3 programmer's reference.  From the K3 Utility, command tester,
enter "AIn;" where n is 0, 1, 2, or 3.

Don't enter the quotes, do enter the semicolon.  "AI;" is a query, it should
respond with "AI0;" or "AI1;", etc.

73 de Dick, K6KR


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Barry
Sent: Saturday, December 28, 2013 9:38 AM
To: [hidden email]
Subject: [Elecraft] K3 Programming question

How do I put the K3 in AI2 or AI3 mode?
I only see NORM and 1 as choices in the config menu for AUTOINF.  I am
running the latest firmware (MCU 4.67), if that matters.

Barry W2UP



--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Programming-question-tp7582161.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html