Fred,
Download KPA500 firmware 1.11 to your KPA500. It will fix the problem.
73,
John
----- Original Message -----
From: "Fred Jensen" <
[hidden email]>
To: "Elecraft Reflector" <
[hidden email]>
Sent: Monday, September 19, 2011 6:24 PM
Subject: [Elecraft] K3 Pwr Per Band
>I thought I understood this.
>
> Pwr=PerBand
> KPA500=Stby
> K3 Pwr set to 100W
> Hit key, get 100W from K3
>
> KP500=Operate
> K3 Pwr set to 32W
> Hit key, get 500W from amp
>
> Now,
> KPA500=Standby
> Hit key, get 32W from K3
>
> I've never found a technology I couldn't screw up, I seem to be
> maintaining my record. Any help?
>
> 73,
>
> Fred K6DGW
> - Northern California Contest Club
> - CU in the 2011 Cal QSO Party 1-2 Oct 2011
> - www.cqp.org
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
