K3 Question on Bandwidth setting via Macro

[John Klewer-2]

I have a macro which, while configuring my K3S for FT8 operation, sets BW
to 4.0 kHz.....the 6.0 kHz roofing filter is (apparently) automatically
selected and I do not actually realize 4-ish kHz BW until I manually select
the 13 kHz roofing filter.

It seems from the Programmer's reference that the XFIL function is a Get
not Set function.

I would appreciate anyone who would set me straight on either what I am
doing wrong or if this is a "problem" that can't actually be solved with
the firmware/hardware as constituted.

Thanks in advance

John, N6AX
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]